It was the same ride on 1st of May when these problems started! It felt like the power was cutting/ stalling very shortly. And sometimes bike even did stall and it was difficult to get running again!
My bike went to Biketeam Raisio and first they found that idle actuator was not working as it should. They changed the new one and checked the error codes and it looked better.
But after I got bike back home I couldn’t ride it more than 30km! All the problems were back or they were even worse!
Bike went back to Biketeam and now with some serious investigations!
“The engine running problems continues. Error codes comes from:
000230 electric fuel pump
000335 Crankshaft sensor
000561 DME voltage supply, terminal 30
Cleaned a badly oxidized ground wire under the voltage regulator, after this the idle running improved considerably. Was running for 30 min. with some throttle every now and then without stalling. The error codes did return.
Measured petrol pressure at about 3bar, so OK! Ignition coils measured, are OK! Gas valve housing cleaned, Wire harness inspected and found no significant abrasions/wear but when the harness is moved with hand the injector nozzle activates and sprays gas into the intake manifold (!). The harness was peeled over a distance of about 30cm and found a point where the wires were badly worn and the plus wire was connecting with other wires, fixed! After this, the bike was test ridden a couple of times with no problems and no error codes came back. The repair was deemed successful.”
I feel a strong sense of gratitude and I deeply respect Biketeam for what they have done! They spent incredible amount of time/ hours to find the problem and they finally did! I really hope that my bike will work now… At least this summer!
On 4th of June I was riding by bike back home! Everything was working and bike felt smooth!
GoZa Mite 