Go - Za

RallyRaid products makes nice additional tanks for KTM 690 Enduro. I bought one for my bike last autumn but it took too long for me install this to my bike. Now I finally did it!

At first I removed the rear fairing… As you can see my bike is totally dirty!
Then I needed to empty the fueltank, so I needed to lift the airfilter box a little bit up so I could detach the fuelpipe.

Then using the bikes own fuelpump I removed the fuel. I had too much gasoline in my tank (about 8 litres!)

When the tank is empty I could start to remove the fuelpump from the bottom of the tank.

I only needed to take the pump out from the tank, remove the wires and then I could add this fuel connector adapter to the bottom of the fuelpump.

Then I needed to drill the holes to rear fairing (18mm) and start install the rear rack. This rack has the new bolts that will go throught the holes in the fairing for the proper installation.

After the rack is installed it’s time for the additional tank itself.

I was lucky with my miniblinkers that I installed last autumn. They are in perfect position and I didn’t have to change anything!

My bike is missing the passenger footrests so I needed to make an contemporary ironbar to keep the the tank still.

Here the bike is ready:

But still very dirty… So finally I washed the bike!

And finally I got the chance to test my bags I bought last autumn. These are from Poland (check: http://www.xcountry.pl). I will also try these in real action and I will make tours that will take many days!

I can’t wait to hit the gravelroads and tracks!